Equipment brands after the PPE Inspector course
Which brands of equipment can you inspect after our course?
Our course prepares you to carry out periodic inspections of equipment as a competent person. An inspector must know the instructions and the inspection procedure for a given product and have the knowledge and skills needed to assess it.
The list below concerns periodic inspections. It does not cover authorisation for repairs, servicing or tasks reserved for the manufacturer.
In the “Our course is enough” column, “Yes” means that our course is enough to inspect equipment of that brand. “Unfortunately not” means that the manufacturer’s course is required. In that case completing our course does not replace the manufacturer’s training, its authorisation or an inspection by a body it has named.
“Yes, with exceptions” means that our course is enough for most equipment of that brand, but the manufacturer’s course is required for some of it. Which equipment this applies to is given in the “Notes” column. “Limited” means that our course is enough only for a small part of that brand’s equipment.
| Brand | Our course is enough | Notes | Manufacturer’s website |
|---|---|---|---|
| 3M DBI-SALA / Protecta | Yes, with exceptions | Manufacturer’s course required for winches and some self-retracting lifelines | 3m.com |
| ART | Yes | climb-art.com | |
| ASSECURO | Unfortunately not | ASSECURO service, an authorised service centre or a person trained by ASSECURO. | assecuro.pl |
| At Height | Yes | atheightuk.com | |
| AUSTRIALPIN | Yes | austrialpin.at | |
| BEAL | Yes | beal-planet.com | |
| Black Diamond | Yes | blackdiamondequipment.com | |
| BLUE ICE | Yes | blueice.com | |
| CAMP | Yes | camp.it | |
| Climbing Technology | Yes | climbingtechnology.com | |
| CMC | Yes | cmcpro.com | |
| Courant | Yes | mycourant.com | |
| Cousin Trestec | Yes | cousin-group.com | |
| Cresto | Yes, with exceptions | Manufacturer’s course required for rescue devices | crestogroup.com |
| Delta Plus | Unfortunately not | The manufacturer or an organisation it has authorised. | deltaplus.eu |
| DMM | Yes | dmmwales.com | |
| EDELRID | Yes | edelrid.com | |
| EDELWEISS | Yes | edelweiss-ropes.com | |
| Fall Safe | Unfortunately not | A competent person accredited by FALL SAFE. | fallsafe-online.com |
| FIXE | Yes | fixeclimbing.com | |
| GILMONTE | Yes, with exceptions | Manufacturer’s course required for type A low-stretch ropes | gilmonte.eu |
| Grivel | Yes | grivel.com | |
| Heightec | Yes | heightec.com | |
| Honeywell Miller | Unfortunately not | A qualified person. Repairs only by the manufacturer or persons it has authorised. | honeywell.com |
| Irudek | Unfortunately not | irudek.com | |
| ISC | Unfortunately not | iscwales.com | |
| JSP | Yes | jspsafety.com | |
| KASK | Yes | kask-safety.com | |
| KONG | Unfortunately not | KONG requires inspectors to be on its list of KONG inspectors, which is rather absurd. The list seems too short to include everyone trained in Poland. On top of that, KONG inspector courses are held in Italy, and very rarely. A policy that is hard to understand. | kong.it |
| Kratos Safety | Unfortunately not | kratossafety.com | |
| Maillon Rapide (Péguet) | Yes | peguet.com | |
| Mammut | Yes | mammut.com | |
| Metolius | Yes | metoliusclimbing.com | |
| MSA | Yes | us.msasafety.com | |
| Notch | Yes | notchequipment.com | |
| Ocún | Yes, with exceptions | Manufacturer’s course required for connectors (EN 362). An odd rule, but that is what the instructions say. | ocun.com |
| Petzl | Yes | petzl.com | |
| Portwest | Yes | portwest.com | |
| PROTEKT | Yes, with exceptions | Manufacturer’s course required for some self-retracting lifelines and rescue winches | protekt.pl |
| PROTOS | Yes | pfanner-austria.at | |
| Raumer | Unfortunately not | A technician authorised by the manufacturer. | raumerclimbing.com |
| Rock Empire | Yes | rockempire.cz | |
| Rock Exotica | Yes | rockexotica.com | |
| SALEWA | Yes | salewa.com | |
| SIMOND / Decathlon | Yes | simond.com | |
| Singing Rock | Yes, with exceptions | Manufacturer’s course required for self-retracting lifelines | singingrock.com |
| SKYLOTEC | Yes, with exceptions | Manufacturer’s course required for rescue devices and powered winches | skylotec.com |
| Sterling | Yes | sterlingrope.com | |
| TAZ | Yes | taz3d.fr | |
| TENDON | Yes, with exceptions | Manufacturer’s course required for dynamic ropes for work at height and rescue | mytendon.com |
| TEUFELBERGER | Yes | teufelberger.com | |
| Tractel | Limited | Manufacturer’s course required for all equipment except harnesses. A very odd approach, but that is what the instructions say. | tractel.com |
| Vertiqual | Unfortunately not | Only the manufacturer or an inspection centre it has authorised. | vertiqualsafety.com |
| Wild Country | Yes | wildcountry.com |
How often an inspection is needed follows from the instructions for the specific product and the conditions of use. For some equipment, intervals shorter than 12 months are required or recommended. A periodic inspection does not replace servicing that is required separately, or a special assessment after an incident.
Manufacturers may change the rules for inspecting their equipment, so this list may change and may not be up to date when you read it. We try to keep this page updated, but assessment and responsibility always lie with the inspector who carries out the inspection and fills in the documentation. Being able to judge whether they can inspect a given item is a basic skill an inspector must have. An inspector who cannot tell whether they are competent to carry out an inspection is not competent, because they do not understand that they must read the instructions.
See also